Configuration of Broadband and leased line in Switch

FOLLOW THE FOLLOWING STEPS FOR CONFIGURATION OF BROAD BAND MODEM. 01. PING 192.168.1.1(DEFAULT IP ADDRESS OF BROAD BAND MODEM) 02. OPERN YOU...

FOLLOW THE FOLLOWING STEPS FOR CONFIGURATION OF BROAD BAND MODEM.

01. PING 192.168.1.1(DEFAULT IP ADDRESS OF BROAD BAND MODEM)
02. OPERN YOUR WEB BROWSER TYPE http://192.168.1.1
03. type user name: admin, password: admin.
04. goto advanced setup>WAN
05. click on edit on line containg vpi/vci 0/35.
06. click on next > change the connection type to pppoe
07. click on next > enter username and password and service name.
08. click on next>next> save
09. again advanced setup screen will appears
10. click on save/reboot.

after two minutes.

01. again open the web browser and type 192.168.1.1
02. enter username : admin and password: admin
03. click on device info.
04. note down the primary dns server and secondary dns server.
05. configure the system in which you want broad band as follows

ip address 192.168.1.x
subnet mask 255.255.255.0
default gateway 192.168.1.1
preferred dns server: <enter the value from step 4>
alternate dns server:<enter the value from step 4>


or

ip address 192.168.1.x
subnet mask 255.255.255.0
default gateway 192.168.1.1
preferred dns server: 192.168.1.1

if you dont want borad band in a system then dont configure the default gateway, preferred dns server and alternate dns server in that system.